Weipa Sea Temperature in March

Looking to find out what the average sea water temperature in Weipa is for March? Find out what the lowest, highest, and average water temperatures are for Weipa over the past 10 years.

Average water temperature in Weipa for March

The average, high, and low temperatures below should help you if you can swim in the water in Weipa in March.

Average

29.98° C

85.97° F

High

32.2° C

89.96° F

Low

28.32° C

82.98° F

Water temperature range by day in March in Weipa

The chart below shows the range of low and high temperatures by day for the month of March in Weipa.

Average daily water temperatures in Weipa for March

Day	Average	Low	High
1	30.06° C	28.95° C	31.32° C
2	30° C	29.01° C	31.67° C
3	30.01° C	28.86° C	31.74° C
4	30.1° C	28.56° C	31.82° C
5	30.24° C	29.13° C	32.05° C
6	30.13° C	28.32° C	32.2° C
7	30.22° C	28.36° C	32.18° C
8	30.11° C	28.37° C	32.1° C
9	30.22° C	28.51° C	32.03° C
10	30.23° C	28.47° C	31.96° C
11	30.22° C	28.78° C	32.09° C
12	30.27° C	29.01° C	32.17° C
13	30.17° C	29.1° C	32.18° C
14	30.22° C	29.27° C	32.12° C
15	30.18° C	29.46° C	32.05° C
16	30° C	29.13° C	31.98° C
17	30.01° C	29.21° C	31.96° C
18	30.05° C	29.19° C	31.34° C
19	30.01° C	29.17° C	31.14° C
20	29.92° C	29.15° C	31.12° C
21	29.89° C	29.14° C	31.05° C
22	29.78° C	28.76° C	30.93° C
23	29.7° C	28.64° C	30.59° C
24	29.66° C	28.77° C	30.28° C
25	29.74° C	28.87° C	30.24° C
26	29.69° C	28.55° C	30.33° C
27	29.65° C	28.55° C	30.48° C
28	29.7° C	28.72° C	30.56° C
29	29.73° C	28.93° C	30.51° C
30	29.73° C	29.2° C	30.11° C
31	29.75° C	29.22° C	30.29° C

Water temperature in March for locations near Weipa

Port Musgrave

Australia, Australia and Oceania

Data source and citation

Raw data for the calculations made to find the sea surface temperature in Weipa comes from the National Oceanic and Atmospheric Administration (NOAA) and their 1/4° daily Optimum Interpolation Sea Surface Temperature.

The water temperature data is constructed by combining observations from different platforms (satellites, ships, buoys, and Argo floats) on a regular global grid. A spatially complete sea surface temperature map is then built by interpolating to fill in gaps in the data.

If you'd like to use any of the information above in the format it is presented, please use the citation tool below.